How to pack books and clothes for shipping
A bookcase and a wardrobe call for different boxes. Books soon make a box heavy, even if it is only partly full. With clothes, the priorities are keeping them dry and choosing a box that will hold its shape.
Go to the packing steps
How to pack your parcel
Split the books between boxes
Choose small, sturdy boxes. Lay the books flat, largest first, with the edges inside the footprint of the stack. A sheet of card above and below helps protect the covers.
Set oversized books aside
Magazines wider than the box will bend at the edges if they rest on a smaller stack. Use a separate, wider and shallower box. Give an illustrated dust jacket or an already dented corner a smooth protective layer and photograph the detail before packing it.
Group the clothes
Empty the pockets, fold the dry clothes and put them in clean bags. Wrap buckles, belts and other hard accessories separately so they cannot mark the fabric.
Isolate shoes and hard fittings
Bag dry shoes separately and wrap each belt buckle. If a jacket and a pair of shoes travel together, use a divider to make two side-by-side spaces. Keep soles away from lapels and knitwear.
Fill the gaps
Tuck crumpled paper around the stacks to stop them shifting. If the box of books is already heavy, close it and start another.
Seal, weigh and number each box
Seal the centre seam and both side seams on the base and lid with parcel tape. If you have several boxes, number each one and record its contents, weight and dimensions.
Worked example: ten books, two jumpers and a belt
Weigh the books in two groups and measure the largest book in each. Use a box for each group if the whole stack would be hard to lift. Put the widest books on the bottom and fill the gaps along the spines.
Fold the jumpers and bag them. If there is room beside a stack, put a cardboard divider between the books and clothes. Place the wrapped belt on the book side. If a jumper has to be forced under the flaps, use another box for the clothing.
Checks before sealing
- Lift the box slightly, supporting it from below. The base should stay flat, with no hard corner pressing through the cardboard.
- Bring the flaps together without tape. If they spring back when released, remove a layer and try again. For customs, keep a contents list for each box.
Troubleshooting
Does the stack slide across the base? Fill the gap on the side it moves towards with compacted packing paper. A blanket laid across the top will not stop sideways movement.